| Customization: | Available |
|---|---|
| After-sales Service: | on Service |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 42622/set
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model NO. | ZK C80-300, Z120-300 | Automatic Grade | Automatic |
| Usage | Roof | Motor Power | 15kw |
| Speed of Production | 12-15m/Min | Mode of Drive | Chain Drive |
| Cutting Mode | Hydraulic | Transport Package | Naked or as Required |
| Specification | 97000mm*1600mm*2000mm | Production Capacity | 20/mon |
The main features of the automatic CZ interchanging machine are as follows:
1. cutting without changing the tool;
2. quick change, three minutes any change;
3.adjustable, web, flange, flange edge can be done, adjusted in millimeters;
4.C/Z steel integrated machine,C/Z three-step change;
5. the coaxial design, reduce the broken shaft appeared on both sides of the height inequality problem on the C, Z steel sandalwood using high strength steel plate through cold pressing molding, with uniform wall thickness, adjustable size specifications, compressive strength and other characteristics. After cold-bending forming C type steel, although the section size is light, but very in line with the roof of the force characteristics of the steel, the mechanical efficiency of the steel get full play, so that the C, Z type steel can reduce the weight of the building roof, reduce the amount of steel used in the project, and thus become the economic steel, is to replace the Angle steel, channel steel, steel pipe and other traditional steel sandalwood new building materials. C, Z type steel sandalwood and light metal tile with the use of light steel building is the choice.
 |
|
| Main Molding Machine | |
| Feeding Table: |
Guide shaft+Guide wheel |
| leveling: | The top are three flatters and the bottom are four + On both sides there are leading baffles |
| Texture: | 45# |
| Processing technology: | roughing + high frequency heat treatment HRC50-55+ cylindrical fine grinding + surface polishing hard chrome plating |
| Main molding Part: |
18 Roll sets (One of them is the waist-height molding 87-95 degrees arbitrary roller set),Equipped with 13 groups of C/Z swap modules, rotation 180 degrees can complete the switch, through the electric button to change the size. |
| Gold pressing: |
Straight steel bar
|
| Leveling: |
Ten roller C/Z special two-axis alignment + four roller two-axis alignment, a total of two alignment units
|
| Lead: | with transmission, upper and lower shaft gear drive |
| Punching: |
Plate punching single hole + punching double hole, can punch waist hole, with round hole Φ14mm and Φ16mm and oval hole 28×16mm and 28×14mm arbitrary choice.
|
| Cutting: |
After forming, stepless cutting system, cutting without tool change, manual change. |
| Cutting tool material: | Cr12 |
| Programmable Logic Controller | |
| Main control cabinet: |
1 (aviation plug) |
| Replacement mode: | (electric) replacement, (three replacement motors: 0.75KW*3) |
| Change type distribution box: | 1 (installed in the middle of the frame) |
| External controller: | 1 (can be convenient in the production process, debugging process point control forward, backward) |
| Discharge Machine | |
| Load capacity: |
5 tons
|
| Holding method: |
Manual (The center of the four connecting rod is tightened outward)
|
| Brake: | Double hold spindle |
| Feeder Table | |
| Supporting material length: | 3 meters 2 pieces |
| Supporting mode: | The frame body is welded with channel steel and Angle steel, and the surface is mounted with roller |
| Performance Parameter | |
| Roll material: | Main roll: GCR15 auxiliary side roll: Cr12 Processing tech: forging tempering + rough turning + quenching treatment HRC58-60+ NC finishing turning, finishing polishing hard chrome plating. |
| Main shaft: | |
| Material: motor drive shaft: 40Cr Other rolling roller: 45# Processing tech: conditioning treatment HB210-230+ rough wheel + cylindrical grinding + polishing surface hard chrome plating. |
|
| Production Product Parameters | |
| Production product specifications: | 1. C width (80-300mm), Z width (120-300mm) between arbitrary change |
| 2. Any change between waist height (40-80mm) | |
| 3. Small side (10-25mm) | |
| 4. Plate thickness (1.5-3.0mm) adjustable | |
| Discharge speed: | high speed 25m/min (according to the number of holes) |
| Material applicable: | 235 hot rolled strip or hot rolled galvanized strip (below 1.5-3.0mm) |
Regional Advantages
Zhongke Tile Press Machine Factory is located in China's machinery and casting township-- Botou City. It is well located with Beijing and Tianjin in the north and Bohai Sea in the east. Botou City has developed convenient and multifunctional traffic lines. The main transport lines in Botou are: Beijing - Shanghai Railway, expressways and 104 national road. Zhongke is a manufacturer of tile press machines, we have many years of R & D, design and production of rich industry experience. Nowadays, our company has formed a complete modern management model with great product development and innovation ability. Our products are favored by global customers because of the lightweight structure, novel design and high degree of innovation.
Technological Superiority
After years of practical experience accumulation and industry experts design layout, our company in production, sales, installation, commissioning and provide technical consultation of tile press has great advantages. Our factory is a modern enterprise with strong technical strength and production capacity. Our Company products rely on high quality and low price and good technical performance, in the customer base to harvest good feedback. And we can also according to user requirements for special design and manufacturing, at the same time in the production, installation, commissioning and maintenance of color steel equipment for users to provide one-stop service and technical guidance.
Marketing Service
Our products are sold all over the world, and we have many years of export experience and flexible export advantages. Have a good understanding of different customer needs in developed and developing countries. In addition, we have a special foreign trade team will timely reply to your doubts, senior designers will be in accordance with your wishes or to provide the program design, our skilled technical workers will produce according to your order. Our sales and design staff will carefully listen to your needs and requirements, and completely according to your needs for design and manufacturing, to help you get the ideal equipment and products. Our company supplies different kinds of products. High quality and favorable price. We′re pleased to get your Inquiry and we will come back to as soon as possible.
Our main products
Including: Roll Forming machine, Glazed Tile Forming Machine, Roof Panel, Wall Panel Molding Machine, C/Z Steel Machine, JCH Roll Forming Machine, Floor Deck Roll Forming Machine, Rolling Shutter Door Forming Machine, Double Color Steel Tile Forming Machine, Shearing Plate and Bending Machine, Composite Plate Production Line, other auxiliary equipment, Shaped Tile Pressing Machine and other series products, facing all over the world.
Our company's products beautiful and magnificent in appearance, the structure is light and reasonable, tile category variety. Therefore, our products are widely praised by the color steel industries and customer friends of the world.
Tag: roof tile roll forming machine, roof panel roll forming machine, cold roll forming machine
){kind=link}